05-09 Ford Mustang GT Turbo System, CARB LEGAL, (Manual Trans Only)

TURBONETICS 05-09 Ford Mustang GT Turbo System, CARB LEGAL Turbonetics’ complete, bolt on single turbo kit takes your 2005-2009 Mustang GT from 300 Crankshaft HP (320lb/ft) to approximately 560HP (400lb/ft) at just over 8psi of boost. With boost pressure building to 6psi at only 3500rpm, turbo lag is virtually eliminated. The installation can be completed in a day with normal mechanics tools. No cutting or fabrication is required - this kit comes with everything to transform a tame Mustang into a 560HP beast.   The Turbonetics turbo kit runs cooler and at lower boost pressures than comparable supercharger kits, ensuring years of dependable performance for your 4.6l engine.   Main features: ·         60 series Ceramic Ball Bearing turbo, ·       60mm compressor inducer ·         Spearco Front Mount Air to Air Intercooler ·         Evolution 35mm external wastegate                                   ·         Diablo hand held ECU re-flash tool ·         All exhaust and intake plumbing ·         All mounting hardware included ·         50 state emissions legal     All system components mount to existing factory locations and maintain all original equipment, including factory air conditioning. With Turbonetics Turbo Systems you no longer have to worry about having your vehicle out of operation for 4-6 weeks in order to get a custom turbo kit fabricated. Our kits can easily be installed in less than a day.   ECU Re-Flash: • No additional piggy-back system required • No additional wires to cut, splice or connect • Retains all factory accessories and sensors • Uploader included to flash ECU with new program • Ability to re-flash ECU back to stock settings • No additional tuning required • Modified fuel and timing maps   Included in kit: ·         Ceramic Ball Bearing Turbocharger ·         Turbonetics Evolution External Wastegate ·         Spearco Front Mount Intercooler ·         Bosch By-Pass Valve ·         T304 Stainless TIG Welded Exhaust Piping which includes o    From stock Cat Converters to Turbocharger o    From Turbocharger back to stock exhaust system o    From wastegate discharge into exhaust downpipe ·         Aluminum TIG Welded and polished Intake Piping from turbocharger to intercooler to throttle body ·         Silicon molded hose for connection to the stock airbox ·         8x 39 lb/hr fuel injectors ·         Fuel Pump Controller, pre-programmed (boost referenced) with harness ·         8x Spark Plugs, Early style, 1 heat range colder than stock  ·         8x Spark Plugs, Late style, 1 heat range colder than stock ·         Thermostat (used for later style '07-up) ·         High flow aftermarket air filter used in a stock configuration ·         Diablo hand held ECU programmer with pre-loaded Turbonetics CARB legal program ·         De-gas reservoir ·         Turbine housing and tube wrap heat shielding ·         Hardware kits including fasteners, fittings, gaskets, clamps, hoses, and oil lines